Courses
HGV and plant training courses
LGV licences, Driver CPC, ADR, lorry loader and forklift courses, plus NPORS plant training run as novice courses, refreshers or experienced worker tests. Groups are kept small so you get real seat time.
-
C1LGV licences
Class C1 (7.5 tonne)Drive medium goods vehicles between 3.5 and 7.5 tonnes. A common first step into delivery and distribution work.
-
CLGV licences
Category C (rigid vehicle)The full rigid licence for goods vehicles over 3.5 tonnes, from tippers to curtainsiders.
-
C+ELGV licences
Class C+E (articulated)Move up from a rigid licence to articulated and drawbar combinations.
-
DA C+ELGV licences
Direct Access C+EGo straight to the articulated licence without taking the Category C test first.
-
C1+ELGV licences
Class C1+ETow a trailer behind a C1 vehicle, up to 12 tonnes combined.
-
B+ECar & trailer
B+E car and trailer familiarisationCar drivers no longer need a separate test to tow. This course teaches you to hitch, tow and reverse a trailer safely.
-
DCPCDriver CPC & ADR
Driver CPC periodic trainingThe 35 hours every professional driver needs every five years to keep their Driver Qualification Card, delivered in 7-hour modules.
-
ADRDriver CPC & ADR
ADR – carriage of dangerous goodsThe certificate drivers need to carry dangerous goods by road, including packages and tankers.
-
ALLMILoaders & forklifts
Lorry loader (HIAB)Operate a vehicle-mounted crane safely to load and unload at the roadside and on site.
-
RTITBLoaders & forklifts
Counterbalance forklift (RTITB)Warehouse and yard forklift training for complete beginners and experienced operators.
-
N202Earthmoving
360° ExcavatorDig, load, grade and reinstate with a tracked 360° excavator.
-
N204Earthmoving
Forward Tipping DumperMove and tip material safely with the site dumper.
-
N205Earthmoving
Rear Tipping DumperOperate articulated rear-tipping dump trucks used on quarries and large sites.
-
N214Earthmoving
Road RollerCompact sub-base and surfacing with ride-on rollers.
-
N722Earthmoving
Material Re-HandlerHandle scrap, timber and bulk material with a re-handling machine.
-
N010Lifting & handling
Telescopic HandlerLift and place loads at height on site and on the farm.
-
N209 J8Lifting & handling
Articulated Telescopic Loader (forks)Compact articulated loaders with fork arms, common in agriculture and builders' yards.
-
N001Lifting & handling
Industrial Counterbalanced Lift TruckNPORS-carded counterbalance forklift training for industrial and site settings.
-
N109Access & height safety
MEWP ScissorWork safely at height from a scissor lift.
-
N108Access & height safety
MEWP BoomOperate boom-type mobile elevating work platforms on level and rough ground.
-
N723Access & height safety
Harness and Fall ArrestChoose, fit, inspect and store harness and fall-arrest equipment.
-
N601Agricultural & site
Agricultural TractorSafe tractor operation with trailers, mounted implements and PTO drives.
-
N132Agricultural & site
Plant Mover (non-operational duties)Move plant around site, for example for maintenance or repositioning, without carrying out operational tasks.
-
PUWERWork equipment safety
PUWER: safe use of work equipmentThe safety and training required for all workplace machinery, from forklifts and plant to workshop tools, under the Provision and Use of Work Equipment Regulations 1998.
Not sure where to start?
Choose your route
On the road
HGV & logistics training
Which lorry licence you need, how the categories fit together, plus Driver CPC, ADR, HIAB and forklift.
On the site
NPORS plant training
Excavators, dumpers, telehandlers, MEWPs and more, with novice, refresher and experienced worker routes.
In the workplace
PUWER training
The Provision and Use of Work Equipment Regulations: safety and training for all workplace machinery.
Step by step
How to get your HGV licence
The medical, theory tests, Driver CPC and practical test, in the order you do them.
Ready when you are
Book a course or ask a question